Videos

Nitrogen Gas Spring Repair

LARGE SERIES (90.10) REPAIR

Shows how to discharge, repair and charge the large (90.10) series nitrogen gas springs.

MINI SERIES (LJ/L/U SERIES) REPAIR

Shows how to discharge, repair and charge the mini (LJ/L) and U series (U.0400-U.1600) nitrogen gas springs.

Nitrogen Gas Spring Repair Tools

USING A LOAD CELL AND TEST STAND

Shows how to use a DADCO Load Cell and Test Stand.

C-RING REMOVAL PLIERS – 90.355

Shows how to properly use the 90.355 C-Ring Removal Pliers.

C-RING REMOVAL PLIERS – 90.356

Shows how to properly use the 90.356 C-Ring Removal Pliers.

C-RING INSTALLATION TOOL – 90.352

Shows how to properly use 90.352 C-Ring Installation Tool.

REPAIR OF A LOAD CELL

Shows how to repair a DADCO Load Cell.

USING A PRESSURE ANALYZER

Shows how to use a DADCO Pressure Analyzer.

REPAIR OF A PRESSURE ANALYZER

Shows how to repair a DADCO Pressure Analyzer.

Miscellaneous Nitrogen Gas Spring Accessories

VIBRATION RESISTANT BLEED VALVE (BV5G)

Demonstrates how the BV-5G Vibration Resistant Bleed Valve works.

QUICK DISCONNECT FILLING ASSEMBLY (90.310.338 & 90.310.340)

Demonstrates how the 90.310.340 Quick Disconnect Filling Assembly with self-venting capability works while comparing to the 90.310.338 Standard Quick Disconnect.

QUICK DISCONNECT FILLING ASSEMBLY (90.310.340)

Demonstrates how the 90.310.340 Quick Disconnect Filling Assembly with self-venting capability works.

TEC DIE STORAGE BLOCK DEMONSTRATION

Demonstrates how the DADCO TEC Die Storage Block will react in a press if they are not removed prior to operation.

MINI LINK HOSE ASSEMBLY

Demonstrates how to put together a DADCO Mini Link Hose Assembly

Monitoring Nitrogen Gas Springs

EDS ELECTRONIC PRESSURE MONITOR

Shows how to properly set up and use the EDS Pressure Monitor Option.

DPT ELECTRONIC PRESSURE MONITOR

Shows how to properly set up and use the DPT Pressure Monitor Option.

DSK ELECTRONIC PRESSURE MONITOR

Shows how to properly set up and use the DSK Pressure Monitor Option.

Nitrogen Gas Spring Lifters

SLN.090 MICRO NITROGEN GAS LIFTERS REPAIR ANIMATION

Shows an animation of how to replace the micro gas spring inside.

SLN.180 FLANGE STRIPPER APPLICATION ANIMATION

Shows an animation of the SLN.180 Flange Stripper application.

SLC.500 NITROGEN GAS SPRING RAIL LIFTER

Shows the operation of the SLC.500 lifter.

SLC.800 NITROGEN GAS SPRING RAIL LIFTER

Shows the operation of the SLC.800 lifter.

Custom Systems

DELAY RETURN SYSTEM

Shows the operation of a delay return system including a 3-D Animation.

DELAY RETURN SYSTEM MAINTENANCE AND FILLING

Shows how to properly service the DRS system.

POWER CAM AND POWER PUMP SYSTEM ANGLED ANIMATION

Shows an animation of the power cam installed in a die at an angle to punch a hole in a piece of sheet metal.

POWER CAM AND POWER PUMP SYSTEM INVERTED ANIMATION

Shows an animation of the power cam installed in a die where the part is formed and pierced in the same operation allowing for increased productivity.